Introducing new fire and smoke rated Kegro Doors.

Residential entrance doors in residential buildings must comply with this, both in new construction and conversion. In addition, all these doors must be self-closing with (freewheeling) door closers. Kegro Deuren's BW concept offers an effective answer to the market demand and these new requirements for 30 or 60-minute fire-resistant doors.

To come to the right choice of fire and smoke door, we always make a custom specific offer. This avoids surprises after the contract has been awarded and we say what we do and do what we say! Kegro stands by the client in word and deed throughout the construction phase.

A major advantage after Kegro Deuren's new certification is that the required fire resistance, in almost all cases, is achieved without modifications to the wooden frame (if made of pine or timbers ≥500 kg at 30-min and ≥700 kg at 60-min). All fire-resistant features are included in the door itself. The frame no longer needs to be thickened, so free passage is guaranteed while maintaining the certificate. This means that Kegro fire-resistant doors can be used in standard KVT frames with a rebate of 17 mm without compromising functional performance.

Door-Frame Connection

Kegro Doors manufactures the door leaf, however in the event of fire the total element of door-frame and frame connection to the wall must meet the requirements. The range of Kegro fire doors is therefore fully matched to standard KVT frame details with 17mm rebates or, where possible, even slimmer.

The joinery manufacturer can produce the frames with sidelights and skylights, using the Kegro certificate. For this, all detail drawings are available in the Technical Documentation and processing instructions at kegro.co.uk.

Fire resistant and insulating

Unique is our 60-min fire-resistant, insulating, flat exterior door. This not only meets the EW-60 classification, but also has a U-value of approx. 1.0 W/m²K. This 60mm thick door is suitable for normal KVT 17mm rebate frames.

Smokeproof

In order to meet smoke resistance requirements, it is very important that the door connects airtight to the frame. As a result of the hot smoke, the door leaf may not deform to such an extent that the seal does not close sufficiently. Performance Sa and S200 are therefore largely an interplay between door leaf type, profiling, frame rebate and seals. A Sa or S200 performance is known for all flat Kegro (interior) doors and solid interior and exterior doors.

Complete assortment

The choice of models and designs in 30 and 60 minutes Kegro fire and smoke resistant doors is very wide; Flat or solid doors with EW-30 and EW-60 classification for wooden frames, with and without sidelights or fanlights. In addition to the rich

choice of standard models, luxury design models with decorative mouldings, design grooves, bulkheads and bossing panels are also available on request. The doors can be finished with our top opaque coating system, an HPL top layer or a clear lacquered oak or mahogany noble veneer. In addition to a wide choice of hinges and locks, extras such as a sill, spy eye, letter slot, (freewheeling) door closer, electric locks, locking plates and cable entry are possible. Plenty of choice.

The exterior door models are under GND Guarantee delivered, clearly identified by the additional label for fire and smoke resistance. A safe feeling!

Why fire and smoke resistant doors from Kegro?

• A light and slim frame, thus cost-saving;
• Executable as exterior door and interior door;
• Flat EW-30 doors with rebate 15 (renovation) and 17 possible. Also with pine/fir frames! The great advantage with existing buildings is that in many cases the current window frames do not have to be replaced;
• The window frame no longer needs to be thickened, ensuring free passage while maintaining the certificate;
• In most cases, it is possible without modification to make the existing frame in combination with the new Kegro door fire-resistant and smoke-tight;
• Larger seams allowed (floor with drop sill up to 12mm!);
• CE-proof;
• Wide choice of models in flat or solid;
• Flat doors with lower weight;
• Flat doors with extra-large glass opening up to 150mm from the edge possible;
• Solid doors with narrow stiles and large glass compartment;
• Available as single and double doors;
• Luxury design models available upon request;
• Finish of your choice: opaque coating, HPL cladding or clear lacquered veneer;
• Fire-resistant features completely incorporated into the door and frame-independent;
• Standard KVT frame with 17 mm rebate;
• Side and/or top light possible.

All types of fire-resistant doors are tested according to standard NEN 6069, NEN-EN 1634-1 and where possible classified according to NEN-EN 13501-2. We can offer you all documents for CE marking to NEN-EN 16034. For a complete overview of all possibilities, access to our certificates or no-obligation advice, please contact our specialists in the sales department or visit kegro.nl for the technical data sheets of our fire and smoke resistant model designs.