Monaco is FAPIM's new Roller Strap hinge, ideal for heavy doors, tested to a sash load capacity of 180 kg with only 2 hinges, and CE certified according to EN 1935:2002. The small body dimensions and alignment even after horizontal adjustment make the Monaco perfect for all modern design requirements.
Monaco is made of top-quality materials according to the highest FAPIM requirements. This applies in particular to the special polyamide inserts on the metal hinge housings, which interrupt cold bridges where necessary, thus ensuring better insulation. For more precise mounting, the adjustment plate is additionally pre-assembled on the wing section, and the required machining is very simple: only a few screw holes but no slots to be machined.
Monaco features micrometric 3-dimensional adjustment, where the vertical adjustment is absolutely innovative, as it can be performed with the sash closed, without removing any parts or lifting the door, which is also particularly effective when working on heavy doors.
The MONZA door hinge with counter plate mounting is available in different models for the most commonly used profile systems. With its narrow body of only 22 mm and tight alignment even after horizontal adjustment, the MONZA is very elegant and perfect for essential design requirements. The hinge is equipped with a micrometric, three-dimensional adjustment system. In particular, the patented horizontal adjustment, which can be performed when the door is closed, does not change the aesthetics of the hinge, keeping the frame and sash part perfectly aligned. Finally, the cover cap is safely and securely fastened with a special screw cap.
MONZA guarantees a load capacity of up to 120 kg with only 2 hinges for the two-piece version, and 150 kg for the three-piece version, which is CE-certified according to UNI EN 1935:2004 + EC1:2007, and also exceeds more than 5 million turning cycles in the rigorous internal tests.
Fastening takes place with robust counter plates made of extruded aluminum in both profile grooves, which are equipped with a central hole for the use of an anti-slip screw. MONZA can also be optionally equipped with a burglar-proof pin (already integrated in Velox profile systems).
LOIRA door hinges have always been one of the most successful FAPIM products for the door industry, and in their various designs have always successfully found their place in the market. Today, this surface-mounted hinge is characterized by a high-quality and sophisticated design, capable of meeting the most advanced requirements of modern design. Moreover, thanks to advanced know-how, it is able to combine the already known advantages of older series with even greater ease of use.
LOIRA+ is produced from extruded aluminum profiles. The LOIRA+ is anodizable and available in all types of final finishes. The door hinge is certified to CE standard EN 1935: 02 at 160 kg with only 2 hinges, and tested for 10,000,000 cycles both in the two-piece and three-piece versions. In addition, the pivoting and adjusting components of the LOIRA+ hinge are designed to ensure maximum security even on outward opening doors. The hinge is certified against burglary according to the ENV 1627 SKG standard.** and SKG***.
In all its versions, the LOIRA+ guarantees the greatest flexibility thanks to its adjustment possibilities horizontally, vertically and in compression on the rubbers. The adjustments are independent and can be carried out with the door leaf closed and by only one technician.
LOIRA+ can be applied with different fastening kits suitable for either cold profiles or thermally broken profiles. Such as, for example, the special self-tapping screws, also available in stainless steel, which do not require a fastening counter plate, but allow a much faster assembly than with traditional fastening.